Control Module Information and Entertainment

Operation number: 39370-2

Control module information and entertainment

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Preparatory work

Ignition off




If there is one, remove the DVD from the DVD reader.
Ignition off.

Removal

Removing the information and entertainment module





Remove:
- the connectors
- the 2 screws.
First pull the control module outwards. Then pull downwards.

Installation

Installing the information and entertainment module

Note! Check that there is no dirt in the optical connectors. The bend radius of the optic cables must not be less than 25 mm.

Install:
- the control module in the loose inner compartment
- the connectors
- the 2 screws.

Finishing

Finishing work
Insert a DVD in the DVD reader.
Test the function.