Control Module: Specifications

Component specifications

Shift solenoids









Other values, see diagram. When measuring at other temperature than +20 °C the check-measurement shall be performed at +20 °C. This is to ensure if the resistance is correct or not.

Linear pressure solenoid SLT, SLB1, SLC1, SLC2, SLC3 and Lock-up solenoid SLU









Other values, see diagram. When measuring at other temperature than +20 °C the check-measurement shall be performed at +20 °C. This is to ensure if the resistance is correct or not.

Oil temperature sensor

Oil Temperature Sensor:

Resistance decreases with increasing temperature.
A test measurement must be taken at both temperatures. This is to establish if the resistance is correct or not.

Solenoid p-position lockout