PHM-U201A54 Control Module Main Calibration Data. System Programming Failures. Missing Calibration [2015-2018]: Fault-Tracing: (Verification)
In order that the diagnostic trouble code (DTC) can be reread, the Phone module (PHM) must be restarted. Click the vehicle communication symbol to restart the control module and to erase and read out DTCs again.
NOTE:
After erasing DTCs there is a delay to ensure that the diagnostics for the Phone module (PHM) have been carried out.
Check that the current DTC has disappeared or changed status from permanent to intermittent fault.
Are the diagnostic trouble code (DTCs) still stored?
- YES - INFORMATION
- NO - Troubleshooting has been completed.