Actuator Assembly
- Unplug 4-pin connector at actuator. Actuator is located on left side of engine compartment. Using jumper wires, connect to terminal "D" of actuator connector to battery voltage, and terminal "A" of actuator connector to ground. See Fig 1
.
- Listen for clicking sound from clutch, and locked output linkage. If actuator output linkage is not locked, replace actuator. Check actuator motor operation in each output linkage position. If actuator motor operates as specified, it is operating properly. Replace actuator motor if it does not operate as specified.
Courtesy of AMERICAN HONDA MOTOR CO., INC.