LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1998 >> 2.3CL Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Engine Controls - Basic Diagnostic Procedures) >> Fuel System >> PGM-FI Main Relay >> 3.5RL
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PGM-FI Main Relay: 3.5RL

WARNING: This page is about a different car, the 1999 Acura Integra, 1999 Acura 3.5RL, 1999 Acura 3.2TL, 1999 Acura 3.0CL, and 1999 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove PGM-FI main relay located under left side of instrument panel. Connect battery voltage to relay terminal No. 4. Connect terminal No. 8 to ground. See Fig 1 .
  2. Test for continuity between relay terminals No. 5 and 7. If continuity exists, go to next step. If continuity does not exist, replace relay.
  3. Connect battery voltage to relay terminal No. 6. Connect terminal No. 2 to ground. Test for continuity between relay terminals No. 1 and 3. If continuity exists, go to next step. If continuity does not exist, replace relay.
  4. Connect battery voltage to relay terminal No. 3. Connect terminal No. 8 to ground. Test for continuity between relay terminals No. 5 and 7. If continuity exists, relay is okay. If continuity does not exist, replace relay.
Fig 1: Identifying PGM-FI Relay Terminals (3.5RL)
G96B01359Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals