October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Altitude COMPENSATOR Sensor

Disconnect wiring from sensor. Measure resistance between terminals No. 2 and 3. Measure resistance between terminals No. 1 and 2. If resistance values are not as specified, replace sensor.

ALTITUDE COMPENSATOR SPECIFICATIONS

Terminals		Ohms
2-3		2000-3000
1-2
At 0-4000 Ft.		500-4500
Above 4000 Ft.		2500-6000

NOTE: For all other models, refer to appropriate article in 1988 COMPUTERIZED ENGINE CONTROLS section.