LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1995 >> 318is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Oxygen Sensor >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

Locate oxygen sensor connector below battery console and remove from clip holder. Pull off cover and remove oxygen sensor. To install, reverse removal procedure. Coat threads with anti-seize compound and install. Tighten oxygen sensor to 41 ft. lbs. (55 N.m).

scientia non olet · About LEMON Manuals