MODIC III (08 01 98)

Publication date: 1998-07-01
Reference number: 08 01 98

MODIC III

TECHNICAL SERVICE BULLETIN

Reference Number(s): 08 01 98, Date of Issue: July, 1998

MODIC III

Model(s): BMW, All Models

Group: 08 - MoDiC

Bulletin No.: 08 01 98

Date: July, 1998

SITUATION

MoDiC III is a completely new diagnostic computer designed from the ground up. The MoDiC II was first distributed in 1990 and is being replaced by the MoDiC III.

Although "trying out" the MoDiC III upon receipt is very tempting, it is absolutely necessary to read the entire "Operating and Installation " book that is included with every MoDiC III. The book should be kept in a safe place for future reference. The MoDiC III is delivered with the following:

Intel Pentium Processor
64 MB RAM
TFT color touch screen with 1024 X 768 pixels. TFT is a display that can be read at an angle unlike many lap top computers.
Touch pen. The touch pen should always be used as it will keep the screen clean, avoid damage and is more efficient. Never use any other device such as a screw driver of wrench to touch the screen.
3 gigabyte hard drive
PCMCIA slot plus interface connectors
Radio frequency wireless diagnostic head. A direct connection cable is also included. Future diagnostic head software updates will be accomplished via the MoDiC III update CD. Future applications include flight recorder capabilities.
Future networking capability.
Docking station - the docking station downloads diagnostic updates via the CD drive to the MoDiC III. Unlike the MoDiC II, the MoDiC III has enough memory to download all Diagnostic, Programming, Coding and TIS software. No more loading and unloading between vehicles. The docking station is equipped with a floppy drive, CD drive, 2 main battery charging compartments, printer input and output and docking connection for the MoDiC III. The MoDiC III will print any material saved in it's print queue when installed on the docking station. The docking station(s) can be connected in line with the DIS printer. A docking station is needed for each MoDiC III.
2 main batteries and 1 buffer battery. The buffer battery is an emergency backup battery that is utilized by the MoDiC III only if the installed main battery is depleted. The buffer battery is charged when the MoDiC III is installed on the docking station. When the main battery requires charging it must be removed from the MoDiC III and placed in one of the station's charging ports. At the end of the day it is recommended to place both main batteries in the station's charging ports and the MoDiC III on top of the station. This will ensure that all of the batteries will be charged up and ready for the next day's work.
NOTE: The batteries must be activated (Refer to page 2-9 of your hand book) before they are installed in the MoDiC III the first time (upon receipt from BMW).
12 volt power supply cable-plugs into the vehicle's lighter socket.
Alligator clips and measuring probes.
OBD II test cable - attaches to the diagnostic head in order to interface with the vehicle's OBD socket.
Main diagnostic cable - attaches to the diagnostic head in order to interface with the vehicle's main diagnostic connector.
Multifunction cable MFK 1 - up to 50 volts and 2amps with resistance and diode measurement, multimeter functions and freeze frame capability. Refer to "maximum ranges with MFK 1" on page 2-27 of your manual.
Multifunction cable MFK 2 - up to 500 volts with multimeter functions and freeze frame capability. Refer to "maximum ranges with MFK 2" on page 2-30 of your manual.
Current probe - 0 to 50amps DC/AC

MODIC III DISTRIBUTION

During the first round of MoDiC III distribution, one MoDiC III will be sent to each BMW center. Centers will not receive a MoDiC III until the "BMW Diagnosis and Information Systems and MoDiC III use Agreement" has been signed and returned to BMW NA, attention Paul Manzer. The use agreement was sent out to all centers under separate cover. The total amount of MoDiC IIIs a center will receive is calculated per the following. One MoDiC III per center, additional MoDiC IIIs calculated by 1 MoDiC III per three technicians. DIS tester(s) will be included in the calculation of total MoDiC IIIs required.

BMW centers cannot order a MoDiC III on their own. Orders will automatically be canceled.

Per the Use Agreement "BMW center Obligations" numbers 3 and 4, a $2000.00 core charge will be automatically placed on the BMW center number until the MoDiC II station is returned. All MoDiC II stations are to be returned to the USCO New Jersey address only.

USCO Distribution Services

99-B Caven Point Road

Jersey City, NJ 07305

MoDiC II station core charge number is 86 00 0 000 066

MoDiC II station non-warranty return code: CMODC

SERVICE

Service for the MoDiC III is being handled by SIEMENS. The SIEMENS hotline number is 1 800 215 1646. If SIEMENS determines that the MoDiC III in question requires service, a replacement unit will be sent to you. The defective unit should be placed in the box and promptly returned to SIEMENS. The defective unit will not be returned to you after it has been repaired. Therefore, it is absolutely necessary not to physically abuse the MoDiC III in any way. This includes, but is not limited to, using anything other than the touch pen or your finger on the screen, writing on the case etc. Misuse requiring repairs will be charged directly to the BMW center.

SOFTWARE INSTALLATION

When you receive your new MoDiC III the operating systems and basic software are already installed. Upon start-up you must set the language and input your center data. Refer to page 3-12 section 3.2.5 of your hand book for complete details. Save the MoDiC installation floppy that is included with the MoDiC. It will be required to load future operating software versions. The basis system and program CDs are the same CDs that are used with the DIS. The difference is that the MoDiC III completely loads all of the operating software programs (DIS program and TIS) directly on the hard drive.

If a new Basis system CD is received (IDC 07 02 96) follow the "Installing the DIS basis system CD-ROM" instructions in your hand book page 3-18 sections 3.3.1, 3.3.2 and 3.3.3.

PRICING

MoDiC III pricing is included in the "Center Services Cost Recovery" charge. Refer to your user agreement "Fees" section number 1-3 for complete details.