Test A: Retained Accessory Power (Rap) Feature Does Not Operate Any Accessories

DOOR AJAR INPUT

Condition

Left Door

⁽¹⁾ BCM Display

Enter Diagnostic Mode: Select Input Test BI03

Closed

⁽²⁾ HI

Enter Diagnostic Mode: Select Input Test BI03

Open

⁽²⁾ LO

⁽¹⁾	If BCM displays are correct, go to DOOR AJAR INPUT TABLE 2 .

⁽²⁾	If BCM display is not correct, refer to BCM Input BI03: LEFT DOOR AJAR under SELF-DIAGNOSTIC SYSTEM.

DOOR AJAR INPUT

Condition

Right Door

⁽¹⁾ BCM Display

Enter Diagnostic Mode: Select Input Test BI04

Closed

⁽²⁾ HI

Enter Diagnostic Mode: Select BI04

Open

⁽²⁾ LO

⁽¹⁾	If BCM displays are correct, do Test RAP RELAY 1 TABLE 1 and RAP RELAY 2 TABLE 1

⁽²⁾	If BCM display is not correct, refer to BCM Input BI04: RIGHT DOOR AJAR under SELF-DIAGNOSTIC SYSTEM.