Rear Integration Module Programming

Prior to replacing RIM, note driver personalization features. To set or change personalization settings, see DRIVER PERSONALIZATION  .

After replacement of RIM, perform following procedure to recalibrate automatic level control:

1. Ensure scan tool has been updated with latest software version.
2. Connect scan tool to Data Link Connector (DLC).
3. Turn ignition switch to RUN position.
4. Under chassis main menu, select Rear Integration Module (RIM).
5. Under RIM main menu, select RECALIBRATION.
6. Follow scan tool instructions to recalibrate automatic level control.
7. Reset personalization settings, see DRIVER PERSONALIZATION  .