Programming Using Driver's Information Center
To enter programming, using Driver's Information Center (DIC), perform these actions:
- Turn ignition switch to RUN position.
- Place vehicle in Park.
- Press MEMORY seat button 1 or 2, depending on driver for this session of personalization programming.
- Press INFO button on DIC until FEATURE PROGRAMMING is displayed.
- Press ON/OFF button to enter programming mode.
- DIC displays DRIVER #1 or DRIVER #2, depending on chosen driver for session of personalization programming.
- Press INFO button up or down to scroll through feature choices.
- DIC displays DOORS LOCK IN GEAR.
- Press ON/OFF button to turn this feature ON or OFF.
- Press INFO button to advance to next option.
- Use ON/OFF button to turn one of these features ON or OFF (only one choice can be used at any given time) : DRIVER UNLOCK IN PARK, DRIVER UNLOCK AT KEY OFF, DOORS UNLOCK IN PARK, DOORS UNLOCK AT KEY OFF.
- Press INFO button to advance to next option.
- To exit programming mode, press INFO RESET button on DIC.