Remote Transmitter: Notes
NOTE:
All remote transmitters which are to be recognized by Remote Control Door Lock Receiver (RCDLR) must be programmed in a single programming sequence. If system is placed in program mode, all previously programmed remote transmitters will be erased upon receipt of programming signal from first remote transmitter. Up to 4 remote transmitters may be programmed.
These are modes of operation for remote transmitter feature:
- Mode 0: Remote activation verification feature is disabled.
- Mode 1: Exterior lights flash on a remote UNLOCK command.
- Mode 2: Exterior lights flash on a remote LOCK command.
- Mode 3: Exterior lights flash once on a remote LOCK command, and flash multiple times with a remote UNLOCK command.
- Mode 4: Exterior lights flash once on a remote LOCK command.
- Mode 5: Exterior and interior lights flash once with a remote LOCK command. Exterior and interior lights flash multiple times with a remote UNLOCK command.