Programming Using Driver's Information Center
To enter programming mode with Driver's Information Center (DIC), perform these actions:
- Turn ignition switch to RUN position.
- Place vehicle in Park.
- Press MEMORY seat button 1 or 2 depending on driver for personalization programming.
- Press INFO button on DIC until FEATURE PROGRAMMING is displayed.
- Press ON/OFF button to enter programming mode.
- DIC will display DRIVER #1 or DRIVER #2, depending on chosen driver for personalization programming.
- Press INFO button up or down to scroll through feature choices.
- DIC displays LIGHTS FLASH AT UNLOCK.
- Press ON/OFF button to turn this feature on or off.
- Press INFO button to advance to next option.
- DIC displays LIGHTS FLASH AT LOCK.
- Press ON/OFF button to turn this feature on or off.
- Press INFO button to advance to next option.
- DIC displays HORN SOUNDS AT LOCK.
- Press ON/OFF button to turn this feature on or off.
- Press ON/OFF button to advance to next option.
- DIC displays EXT LIGHTS AT LOCK.
- Press ON/OFF button to turn this feature on or off.
- Press INFO button to advance to next option.
- To exit programming mode, press INFO RESET button on DIC.