LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2001 >> Seville STS >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System >> Programming >> Memory Seats >> Programming Using Driver's Information Center
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Using Driver's Information Center

To enter programming using Driver's Information Center (DIC), perform these following actions:

  1. Turn ignition switch to RUN position.
  2. Place transmission in Park.
  3. Press MEMORY SET 1 or 2 button, depending on driver.
  4. Press INFO button. DIC will display FEATURE PROGRAMMING.
  5. Press ON/OFF button to enter programming mode.
  6. DIC displays Driver #1 or Driver #2, depending on chosen driver for programming.
  7. Press INFO button up or down to scroll through feature choices.
  8. Press ON/OFF button to turn one of these options on or off (only one choice can be ON at any given time): REMOTE RECALL MEMORY or KEY IN RECALL MEMORY.
  9. Press INFO button to advance to next feature.
  10. DIC displays AUTO EXIT SEAT.
  11. Press ON/OFF button to turn this feature on or off.
  12. Press INFO button to advance to next feature.
  13. DIC displays AUTO EXIT STRG WHEEL.
  14. Press ON/OFF button to turn this feature on or off.
  15. Press INFO button to advance to next feature.
  16. To exit programming mode, press INFO RESET button.

scientia non olet · About LEMON Manuals