Power Windows Inoperative - Express Down Function

Step	Action	Yes	No
Schematic Reference: Power Window Schematics DEFINITION: This diagnostic procedure should be used to diagnosis a failure of the express down power window feature.
1	Did you perform the Power Door Systems Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Door Systems
2	Turn ON the ignition with, the engine OFF. Depress the driver power window switch in the down position and hold it for approximately one second. Release the driver power window switch. Does the driver power window continue downward after the switch is released?	Go to TESTING FOR INTERMITTENT AND POOR CONNECTIONS	Go to Step 3
3	Inspect for poor connections at the harness connector of the power window master switch. Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS and CONNECTOR REPAIRS . Did you find and correct the condition?	Go to Step 5	Go to Step 4
4	Replace the power window master switch. Refer to Power Window Switch Replacement . Did you complete the repair?	Go to Step 5	-
5	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2