LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Dash Integration Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the electrical connectors to the DIM.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws securing the DIM top the I/P.

    Tighten:  Tighten the screws to 2 N.m (80 lb in).

  3. Connect the closeout panel light electrical connector (1).
    Fig 1: Locating Closeout Panel Light Electrical Connector
    GM713948Courtesy of GENERAL MOTORS CORP.
  4. Install the I/P closeout panel. Refer to Closeout/Insulator Panel Replacement - Right .
  5. Program the module. Refer to Body Control Module (BCM) Programming/RPO Configuration (RIM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM) .
scientia non olet · About LEMON Manuals