Key In Recall Memory

This feature recalls any previously programmed seat and mirror positions when the key is inserted into the ignition.

Programmable Modes

• Mode 1: ON
• Mode 2: OFF, mode 2 is set as the default mode from the factory.

To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:

Base Audio System

1. Enter the Personalization menu following the instruction listed previously.
2. Scroll to Key In Recall Memory to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.

Navigation System

1. Enter the Personalization menu following the instructions listed previously.
2. Scroll to Key In Memory Recall to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Key In Memory Recall and press the knob once to select it.

When the mode is turned on, an X will appear in the box to the left. If Remote Recall Memory/Recall Driving Positions was turned on previously, selecting Key In Memory Recall will override that choice. The mode you selected is now set. You can either exit the programming mode or program the next feature available.