Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
- NOTE:
Left side shown, right side similar.
Fold the assist handle downward and hold.
- Use a small flat-bladed tool to open the assist handle covers to access the bolts. (1)
- Roof Rail Rear Assist Handle Bolt - Left Side and Right Side (2) - Remove [4x]
- NOTE:
Left side shown, right side similar.
Roof Rail Rear Assist Handle - Left Side and Right Side (1) - Remove [2x]
- Fold the rear seat back to the downward position.
Push in and slide outward, on either side of luggage shade, to disengage integral luggage spring from the quarter lower rear trim panel.
- Luggage Shade (1) - Remove
- NOTE:
Left side shown, right side similar.
Quarter Window Trim Finish Panel Bolt Cap - Left Side and Right Side (1) - Remove [4x]
- Quarter Window Trim Finish Panel Bolt - Left Side and Right Side (2) - Remove [4x]
- Pull the quarter window trim finish panel (3) toward the inside of the vehicle to disengage the clips.
- Disconnect the electrical connectors.
- Quarter Window Trim Finish Panel - Left Side and Right Side (3) - Reposition [2x]
Drop the headlining trim panel (1) down.
Disconnect the electrical connector.
- Release the retaining tabs.
- Remote Function Actuator Module (1) - Remove
NOTE:
The Quarter Window Trim Finish Panel does not need to be fully removed from the vehicle.