Circuit/System Verification

Verify DTC P2980, P3002-P3007, U02CE, U05CF is not set
- If any of the DTCs are set
  Refer to: Diagnostic Trouble Code (DTC) List - Vehicle
- If none of the DTCs are set & DTC P32E7 is set
1. Attempt to DC Fast Charge the vehicle at a known good charging station
2. Ignition/Vehicle OFF, all access doors closed, all vehicle systems OFF, and all keys at least 3 m (9.8 ft) away from vehicle. It may take up to 10 min for all vehicle systems to power down.
3. Ignition ON/Vehicle In Service Mode.
4. Verify DTC P32E7 is set and no other DTC's related to DC Fast Charging set.
  - Verify if DTC P32E7 is set
  1. Program the K16 Battery Energy Control Module.
  2. Verify DTC P32E7 is not set again.
    - If the DTC is set again, replace the K16 Battery Energy Control Module.
    - Go to next step: If DTC P32E7 is not set again
  3. All OK.
- Go to next step: If none of the DTCs are set
Advise customer to notify the charging station manufacturer and charge vehicle at a different charging station.