Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Adapter (4) - Install [2x]

CAUTION:

Refer to Fastener Caution

Drive Motor Battery Charger Bolt (3) - Install and tighten [4x] - Fastener Specifications
Drive Motor Battery Charger Bracket (2) - Install [2x]
Drive Motor Battery Charger Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Battery Charger (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bracket Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Radiator Outlet Hose Retainer (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bracket (3) - Install
Drive Motor Battery Charger Ground Bolt (2) - Install and tighten [2x] - Fastener Specifications
Drive Motor Battery Charger Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the high voltage electrical connector and install the wiring harness retainers as necessary. (1, 2) High Voltage Connectors
Courtesy of GENERAL MOTORS COMPANY

Connect the high voltage electrical connector and install the wiring harness retainers as necessary. (2, 3) High Voltage Connectors
Connect the electrical connector. (1)
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Heater Inlet and Outlet Pipe Bracket Stud (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Wiring Harness Clip (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Receptacle Coolant Inlet Secondary Hose (2) @ Battery Charger - Install
Retainer (1) - Engage
Courtesy of GENERAL MOTORS COMPANY

Heater Inlet and Outlet Pipe Clamp (3) - Install
Retainer (2) - Install
Drive Motor Battery Charger Inlet Hose (4) @ Battery Charger - Install
Retainer (1) - Engage
Courtesy of GENERAL MOTORS COMPANY

Front Trim Finish Compartment Support (2) - Install
Front Trim Finish Compartment Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the wiring harness retainers.
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Front Sight Shield (2) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Compartment Side Sight Shield - Right Side (2) - Install
Fill the cooling system to the proper level. Drive Motor Battery Cooling System Draining and Filling
Enable the high voltage system. High Voltage Enabling