October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Wide Open Throttle Microswitch
- Remove air cleaner and carburetor. Connect ohmmeter to wide open throttle (WOT) microswitch. See Fig 1
that resistance between microswitch terminals is infinity.
- Open throttle valve gradually until ohmmeter indicates zero. Using a vernier caliper, measure clearance between throttle valve and primary carburetor bore.
- Clearance should be .28-.33" (7.2-8.4 mm). If clearance is incorrect, bend WOT microswitch lever to adjust clearance. See Fig 2