Barometric Pressure Sensor: Specifications

Sensor Voltage / Pressure
The Typical Scan Data Values are an average of display values recorded from normally operating vehicles. The Typical Scan Data Values are intended to represent what a normally functioning system would display. The values you get may vary due to a low battery charge or other reasons. But they should be very close. Use the Typical Scan Data Values only after the On-Board Diagnostic system check and finding the on-board diagnostics function properly with no diagnostic codes displayed. Engine must be at operating temperature, idling in Closed loop, Closed throttle, Park or Neutral, and accessories OFF.

BARO Voltage / kPa

4.76 at 101 Volts At Kilopascals (V @ kPa)