Fuel Tank Pressure Sensor: Service and Repair

Fuel Sender Assembly:

REMOVAL PROCEDURE

1. Disconnect negative battery cable. Refer to Service Precautions / Battery Disconnect Caution.

2. Raise the vehicle.

3. Remove the fuel tank. Refer to Fuel Tank Replacement.

4. Remove the fuel tank vapor pressure sensor electrical connector.

5. Remove the fuel tank pressure sensor (1) from the fuel modular sender (2).

INSTALLATION PROCEDURE

1. Install the fuel tank vapor pressure sensor (1) to the fuel modular sender (2).

2. Install the fuel tank vapor pressure sensor electrical connector.

3. Install the fuel tank. Refer to Fuel Tank Replacement.

4. Lower the vehicle.

5. Connect the negative battery cable.