Cruise Control Switch: Service and Repair

REMOVAL PROCEDURE

1. Remove the knee bolster.
2. Push up with a pick from behind the panel in order to disengage the retaining tab on the bottom of the CRUISE CTRL/OFF switch.
3. Slide the CRUISE CTRL/OFF switch out from the panel.
4. Disconnect the CRUISE CTRL/OFF switch electrical connector.
5. Remove the CRUISE CTRL/OFF switch from the vehicle.

INSTALLATION PROCEDURE

1. Connect the electrical connector to the CRUISE CTRL/OFF switch.
2. Install the CRUISE CTRL/OFF switch to the panel. Ensure that the retaining tabs are fully engaged.
3. Install the knee bolster.