LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Malibu Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Shift Control Cable >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Control Cable: Installation

  1. Install the cable through the cowl and carpet. Install the cable grommet and the bolts in the cowl. Tighten the grommet bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install the cable (4) at the shift control assembly (3). See Fig 2.
  3. Install shift control cable onto floor shift control. See Fig 1.
  4. Install the cable at the transaxle cable brackets (1). Install the cable at the gearshift lever (2). See Fig 2.
  5. Adjust the cable. See SHIFT CONTROL CABLE  under ADJUSTMENTS.
  6. Install the center console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS.
Fig 1: Removing & Installing Cable Retainer Clip At Floor Shift Control
G00088331Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Cable At Transaxle Bracket
G00088330Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals