LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Aveo Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Evaporative Emission Canister ReplacementRemoval Procedure >> Installation ProcedureIgnition Coil Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation ProcedureIgnition Coil Replacement

    Fig 1: Identifying Canister Flange to Vehicle Bolt
    GM1289477Courtesy of GENERAL MOTORS CORP.
  1. Insert the canister into the track and slide it into position.
    2. NOTE: Refer to Fastener Notice .
  2. Connect the canister fuel vapor hoses.

    Tighten:  Tighten the evaporative emission (EVAP) canister flange bolt to 4 N.m (35 lb in).

  3. Install the canister flange bolt.
scientia non olet · About LEMON Manuals