LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Cobalt L4-2.0L SC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Barometric Pressure Sensor >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Barometric Pressure Sensor: Service and Repair



Barometric Pressure Sensor Replacement

Removal Procedure




1. Disconnect the barometric pressure (BARO) sensor harness connector.
2. Remove the BARO sensor bracket and bolt.
3. Remove the BARO sensor (2).

Installation Procedure




1. Install the BARO sensor (2).

Notice: Refer to Fastener Notice.

2. Install the BARO sensor bracket and bolt.

Tighten the bolt to 10 N.m (89 lb in).

3. Connect the BARO sensor harness connector.
scientia non olet · About LEMON Manuals