LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Express 2500 V8-4.8L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brake Light Switch: Service and Repair



STOP LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE

1. CAUTION: Refer to Battery Disconnect Caution.

Disconnect the battery negative cable.




2. Disconnect the electrical connector from the stop lamp switch.
3. Remove the retainer from the brake pedal pin.
4. Remove the stop lamp switch and the pushrod to the power brake booster from the brake pedal pin.
5. Unsnap the stop lamp switch from the power brake booster pushrod.

INSTALLATION PROCEDURE




1. Snap the stop lamp switch onto the pushrod to the power brake booster.
2. Install the stop lamp switch with the pushrod on the brake pedal pin.
3. Install brake switch retainer.
4. Connect the electrical connector to the stop lamp switch.
5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals