Removal Procedure
- Disconnect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement or Air Cleaner Assembly Replacement .
- Remove the drive belt. Refer to Drive Belt Replacement or Drive Belt Replacement .
- Lower the vehicle.
- Remove the generator terminal nut (2).
- Remove the engine harness terminal (1) from the generator.
- Remove the generator upper bolts.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Cut the tie straps and reposition the coolant heater cord, if equipped.
- Remove the generator lower bolt.
- Disconnect the generator electrical connector (3).
- Remove the generator.