Front Lower Control Arm Bushing Replacement (Vertical): Notes

Tools Required

• J 21474-01  Control Arm Bushing Set. See Special Tools .
  • J 21474-27  1/2 Inch Puller Bolt Thrust Bearing. See Special Tools .
  • J 21474-2  Bushing Installer Remover. See Special Tools .
  • J 21474-4  Nut
  • J 21474-13  Control Arm Bushing Installer
• J 23444-A  High Pressure Lubricant. See Special Tools .
• J 34126  Driven Sprocket Support Bearing Installer. See Special Tools .
• J 35379  Front Knuckle Support. See Special Tools .