LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Malibu L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Interlock >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



Scan Tool Data Definitions

Body Control Module (BCM)
Battery Voltage Signal
- The scan tool displays 0-20 volts The scan tool displays the voltage as received by the BCM.

Shift Lock Solenoid Command
- The scan tool displays Lock or Unlock. Lock indicates the control circuit is grounded. Unlock indicates the control circuit is not grounded.

Engine Control Module (ECM)
BPP Circuit Signal
- The scan tool displays Applied or Released. The scan tool displays the status of the brake switch.

Transmission Control Module (TCM)
IMS
- The scan tool displays Drive 3, Drive 4\Drive 3, Park\Reverse, Reverse, Drive 3\Drive 2, Drive 2, Park, Invalid, Neutral\Drive 4, Drive 4, Neutral, Reverse\Neutral, Drive 1, Drive 2\Drive 1 or Open for the LZ9. The scan tool displays the position of the transmission range switch.

TR Sw.
- The scan tool displays Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 2 or Drive 1 for the L61 and LZ4. The scan tool displays the position of the transmission range switch.



scientia non olet · About LEMON Manuals