LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Aveo LS, 4D Hatchback, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Immobilizer Control Unit Electrical Connector
    GM1252101Courtesy of GENERAL MOTORS CORP.
  1. Install the immobilizer control unit.
  2. Connect the electrical connector to the immobilizer control unit.
    3. Fig 2: Steering Column Cover Panels & Screws
    GM1248378Courtesy of GENERAL MOTORS CORP.
    NOTE: After replacing the immobilizer, the keys must be re-authorized using the key coding procedure. Refer to Programming Theft Deterrent System Components .
  3. Install the upper and the lower steering column cover panels.
    4. CAUTION: Refer to Fastener Caution .
  4. Install the lower steering column cover panel screws and tighten to 3 N.m (27 lb in).
  5. Turn the steering wheel in order to access the upper steering column panel screw holes. Install the upper steering column cover panel screws and tighten to 3 N.m (27 lb in).
  6. Connect the negative battery.
scientia non olet · About LEMON Manuals