LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Cobalt SS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Throttle Body & Bolts
    GM1769706Courtesy of GENERAL MOTORS CORP.
  1. Inspect the throttle body seal, and replace if necessary.
  2. Position the throttle body to the intake manifold.
    CAUTION: Refer to Fastener Caution .
  3. Install the throttle body bolts and tighten to 10 N.m (89 lb in).
    4. Fig 2: ETC Connector
    GM1825527Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine wiring harness electrical connector (1) to the ETC.
  5. Install the charge air cooler outlet pipe. Refer to Charge Air Cooler Outlet Pipe Replacement .
scientia non olet · About LEMON Manuals