LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Impala LTZ >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.9L - DTC P0010 - DTC P0335 >> DTC P0010 >> Component Testing >> Static Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Static Test

  1. Ignition OFF, disconnect the CMP actuator solenoid harness connector at the CMP actuator solenoid.
    2. IMPORTANT: Ensure component is tested at 20°C (68°F).
  2. Test for 4.6-5.2 ohms of resistance between the high control terminal 1 and the low reference terminal 2 of the CMP actuator solenoid.
    • If the resistance is not within the specified range, replace the CMP actuator solenoid.
scientia non olet · About LEMON Manuals