LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Suburban C2500 >> Repair and Diagnosis >> Steering >> Steering Linkage >> Repair Instructions >> Pitman Arm Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the pitman arm onto the steering gear.
    2. Fig 1: View Of Steering Gear And Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install a new pitman arm washer (2) and nut (1).

    Tighten:  Tighten the nut to 250 N.m (184 lb ft).

  3. Remove the steering gear from the vise.
  4. Install the steering gear. Refer to Steering Gear Replacement (Hydraulic Rack and Pinion) or Steering Gear Replacement (Recirculating Ball Without LMM) or Steering Gear Replacement (Two Mode Hybrid) .
  5. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
scientia non olet · About LEMON Manuals