Front Seat Lumbar Control Switch Replacement

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Seat Lumbar Control Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Adjuster Switch Mounting Plate Procedure Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate. Disconnect the electrical connectors from the switch assemblies.
2	Front Seat Lumbar Control Switch Assembly Tip: Use a flat-bladed tool to release the switch from the mounting plate.

Callout

Component Name

Front Seat Adjuster Switch Mounting Plate

Procedure

Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate.
Disconnect the electrical connectors from the switch assemblies.

Front Seat Lumbar Control Switch Assembly
Tip: Use a flat-bladed tool to release the switch from the mounting plate.