Generator Bracket Replacement (LS3/L99)

Fig 1: Generator Bracket, Nut And Bolts (LS3/L99)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the generator. Refer to Generator Replacement (LLT) or Generator Replacement (LS3/L99) .
1	Nut CAUTION: Refer to Fastener Caution . Tighten: 50 N.m (37 lb ft)
2	Bolt (Qty: 2) Tighten: 50 N.m (37 lb ft)
3	Generator Bracket Procedure Disconnect the engine harness generator connector. Transfer the drive belt idler pulley, if necessary.