October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the appropriate B52 HO2S.
- Ignition ON, verify that the scan tool HO2S 1 voltage parameter is between 350-500 mV.
- If greater than the specified range, test the signal circuit terminal B or 4 of the HO2S for a short to the heater circuit terminal E. If the circuit/connections test normal, replace the K20 ECM.
- If all circuits/connections test normal, replace the appropriate B52 HO2S.