Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Adjust Link to Rear Frame Retaining Nut	175 N.m	129 lb ft
Engine Mount to Front Drivetrain and Front Suspension Frame Retaining Nut	80 N.m	59 lb ft
Engine Splash Shield to Front Drivetrain and Front Suspension Frame Retaining Bolt	9 N.m	80 lb in
Front Drivetrain and Front Suspension Frame to Body Centre Retaining Bolt	160 N.m	118 lb ft
Front Drivetrain and Front Suspension Frame to Body Front Retaining Bolt	160 N.m	118 lb ft
Front Drivetrain and Front Suspension Frame to Body Rear Retaining Bolt	240 N.m	177 lb ft
Front Wheelhouse Liner to Front Air Deflector Retaining Screw	2 N.m	18 lb in
Front Wheelhouse Liner to Rocker Panel Retaining Screw	2 N.m	18 lb in
Oil Pan Drain Plug Splash Shield to Front Drivetrain and Front Suspension Frame Retaining Bolt	19 N.m	14 lb ft
Rear Brake Caliper Anchor Plate to Knuckle Retaining Bolt	110 N.m	81 lb ft
Rear Frame to Underbody Retaining Bolt
First Pass	65 N.m	48 lb ft
Final Pass	+ 125 Degrees
Rear Lower Control Arm to Knuckle Retaining Bolt
First Pass	40 N.m	30 lb ft
Final Pass	+ 120 Degrees
Rear Lower Control Arm to Rear Frame Retaining Nut	175 N.m	129 lb ft
Rear Strut Assembly to Body Retaining Bolt	58 N.m	43 lb ft
Rear Strut Assembly to Lower Control Arm Retaining Nut
First Pass	50 N.m	37 lb ft
Final Pass	+ 120 Degrees
Rear Wheelhouse Liner to Rocker Molding Screws	2 N.m	18 lb in
Steering Gear to Front Drivetrain and Front Suspension Frame Retaining Bolt
First Pass	50 N.m	37 lb ft
Final Pass	+ 120 Degrees
Trailing Link to Knuckle Retaining Bolt
First Pass	40 N.m	30 lb ft
Final Pass	+ 120 Degrees
Trailing Link to Rear Frame Retaining Nut	100 N.m	74 lb ft
Transmission Support to Transmission Mount Retaining Nut	58 N.m	43 lb ft
Transmission Support to Underbody Retaining Bolt	58 N.m	43 lb ft
Upper Control Arm Ball Joint to Rear Frame Retaining Nut
First Pass	80 N.m	59 lb ft
Final Pass	+ 120 Degrees
Upper Control Arm to Knuckle Retaining Nut	120 N.m	89 lb ft