Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotor
Rotor Diameter	321.0 mm	12.64 in
Rotor Discard Thickness*	27.0 mm	1.063 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness (New)	30.0 mm	1.181 in
Rear Brake Rotor
Rotor Diameter	315.0 mm	12.40 in
Rotor Discard Thickness*	21.5 mm	0.846 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Thickness New	23.0 mm	0.906 in
* All disc brake rotors have a minimum thickness dimension cast into them. Replace any rotor that does not meet the minimum thickness dimension.