Body Side Assembly Serviceability (H12-10-03)
Publication date: 2012-03-29Reference number: H12-10-03
BODY SIDE ASSEMBLY SERVICEABILITY
TECHNICAL SERVICE BULLETIN
Reference Number(s): H12-10-03, Date of Issue:
March 29, 2012
| Affected Model(s): | 2007-2011 Chevrolet Caprice, Lumina 2011 Chevrolet Caprice PPV 2009 Chevrolet Lumina UTE 2007-2009 Chevrolet Omega VE 2008-2009 Daewoo W200 2007-2011 Holden VE Sedan, WM Sedan 2008 Holden Lumina UTE 2009-2011Holden VE UTE 2008-2010 Pontiac G8 2008-2011 Vauxhall VXR8 |
SERVICE INFORMATION
As a direct result of product improvements and manufacturing tooling changes, the VE and WM car body side assemblies applicable to MY12 vehicles are now different to those on earlier models (start of production to MY11 inclusive).
The changes involve the side impact sensor and the sheet metal in the lower B pillar area.
- MY 11 and prior body side assemblies cannot be used to repair a MY12 vehicle.
- As stock of the earlier body side assemblies is exhausted, repair of MY07, 08, 09, 10, 11 VE/WM vehicles will require the MY12 body side assembly and an adaptor piece for mounting the side impact sensor. Part number information is shown on the table below; always refer to EPC as part number information may change.
NOTE:
The original P/N's can be used for MY07 to MY11 vehicles until stock is exhausted.
PARTS INFORMATION
| Original MY07- MY11 P/N for body side | Replacement Body Side P/N and adaptor P/N |
|---|---|
| Ute: 92242467 | 92420903 and 92260178 |
| Ute: 92242471 | 92420904 and 92260177 |
| LWB: 92195896 | 92420895 and 92260178 |
| LWB: 92195899 | 92420896 and 92260177 |
| SWB: 92214637 | 92420901 and 92260178 |
| SWB: 92214638 | 92420902 and 92260177 |