LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Wiring Harness Supply, Front Compartment Fuse Block And Electrical Connectors
    GM2191907Courtesy of GENERAL MOTORS CORP.
  1. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in)  .
    3. Fig 2: Identifying Front Compartment Fuse Block Bolt
    GM2191908Courtesy of GENERAL MOTORS CORP.
  3. Install 3 front compartment fuse block bolt (1) and tighten to 6 N.m (53 lb in)  .
  4. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals