LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (PGM-FI System) >> Knock Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine oil dipstick.
  2. Disconnect the knock sensor 1P connector (A).
    Fig 1: Lnock Sensor 1P Connector And Knock Sensor With Torque Specifications
    G06429379Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the knock sensor (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals