Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 GMC Savana Special, 2010 GMC Savana Camper Special, 2010 GMC Savana, 2010 Chevrolet RV Cutaway, and 2010 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Right Side Knee Bolster Trim Panel

Courtesy of GENERAL MOTORS CORP.

Remove the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .

Fig 2: Locating Body Control Module Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connectors (2) from the body control module (BCM) (1).

Fig 3: Identifying BCM Retaining Tabs & Bracket
Courtesy of GENERAL MOTORS CORP.
Release the tabs (2) retaining the BCM (1) to the bracket.
Remove the BCM (1) from the vehicle.