Theft Deterrent Module Replacement

WARNING: This page is about a different car, the 2009 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Theft Deterrent Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR. Refer to SIR Disabling and Enabling . Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement . Remove the ignition key and cylinder. Refer to Ignition Lock Cylinder Replacement .
1	Module Assembly, Theft Deterrent Tip: Disconnect the electrical connector. Program the theft deterrent control module after replacement. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure

Disable the SIR. Refer to SIR Disabling and Enabling .
Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
Remove the ignition key and cylinder. Refer to Ignition Lock Cylinder Replacement .

Module Assembly, Theft Deterrent
Tip:

Disconnect the electrical connector.
Program the theft deterrent control module after replacement. Refer to Control Module References .