LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Impala LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.5L - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Electrical Connector
    GM1608498Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the right knock sensor electrical connector (2).
  3. Fig 2: Identifying Knock Sensor
    GM1800587Courtesy of GENERAL MOTORS CORP.
  4. Loosen and remove the knock sensor.