LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 1099 (Engine Cooling System) >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Condenser-to-Radiator Bolt 6 N.m 53 lb in
Coolant Crossover Pipe Bolt (LZE/LGD) 50 N.m 37 lb ft
Coolant Heater (LS4) 50 N.m 37 lb ft
Coolant Heater (LZ4,LZE,LGD) 60 N.m 44 lb ft
Engine Coolant Air Bleed Pipe/Cover Bolt (LS4) 12 N.m 106 lb in
Lower Radiator Support Bracket Bolt 60 N.m 44 lb ft
Thermostat Bypass Pipe-to-Engine Front Cover Bolt (LZ4,LZE,LGD) 11 N.m 98 lb in
Thermostat Bypass Pipe-to-Throttle Body Nut (LZ4,LZE,LGD) 25 N.m 18 lb ft
Thermostat Housing Bolt/Stud (LZ4,LZE,LGD) 10 N.m 89 lb in
Transmission Oil Cooler Pipe Attachment Nut 7 N.m 62 lb in
Upper Radiator Support Bracket Bolt 10 N.m 89 lb in
Water Outlet Housing Bolt (LS4) 15 N.m 11 lb ft
Water Pump Bolt (LS4) 15 N.m 11 lb ft
Water Pump Bolt (LZ4,LZE,LGD) 25 N.m 18 lb ft
Water Pump Manifold Bolt (M8) (LS4) 30 N.m 22 lb ft
Water Pump Manifold Bolt (M10) (LS4) 60 N.m 44 lb ft
Water Pump Pulley Bolt (LZ4,LZE,LGD) 25 N.m 18 lb ft