LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> Power Liftgate Malfunction (Liftgate Interior Release Open/Close Switch Malfunction) >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the I/P multifunction switch.
  2. Test for infinite resistance between the signal terminal 7 and the ground terminal 3 with the liftgate open switch in the inactive position.
    • If not the specified value, replace the I/P multifunction switch.
  3. Test for less than 3 Ω between the signal terminal 7 and the ground terminal 3 with the liftgate open switch in the active position.
    • If greater than the specified range, replace the I/P multifunction switch.
  4. Test for infinite resistance between the signal terminal 8 and the ground terminal 3 with the liftgate disable switch in the inactive position.
    • If not the specified value, replace the I/P multifunction switch.
  5. Test for less than 3 Ω between the signal terminal 8 and the ground terminal 3 with the switch in the disable position
    • If greater than the specified range, replace the I/P multifunction switch.
scientia non olet · About LEMON Manuals