Removal Procedure

Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

Fig 1: Identifying Steering Linkage Outer Tie Rod Nut

Courtesy of GENERAL MOTORS CORP.

Remove the steering linkage outer tie rod nut (1).

Fig 2: View Of Steering Linkage Inner Tie Rod Nut

Courtesy of GENERAL MOTORS CORP.

Loosen the steering linkage inner tie rod nut (1).

Fig 3: Outer Tie Rod Assembly And Puller Tool

Courtesy of GENERAL MOTORS CORP.

CAUTION:

Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper tool to separate all ball joints.

Use the J-24319-B puller in order to disconnect the steering linkage outer tie rod from the steering knuckle.

Fig 4: Identifying Steering Linkage Inner & Outer Tie Rod

Courtesy of GENERAL MOTORS CORP.

Remove the steering linkage outer tie rod (2) from the steering linkage inner tie rod (1). Count the total number of complete rotations necessary in order to remove the steering linkage outer tie rod from the steering linkage inner tie rod.