LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Volt >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Electronic Brake Control Module Programming and Setup >> Replace and Program EBCM or Reprogram EBCM
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program EBCM or Reprogram EBCM

To program a replacement or an existing EBCM, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool. See Special Tools .
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select Electronic Brake Control Module-Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select Electronic Brake Control Module- Setup and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  6. With a scan tool access the EBCM, Configuration/Reset Functions, Electronic Brake Control Module Learn.
  7. With a scan tool, access the EBCM, Configuration/Reset Functions, Brake Control Learn.
  8. With a scan tool, access the Multi-Axis Acceleration Sensor Module, Configuration/Reset Functions, Yaw Rate Sensor Learn.
scientia non olet · About LEMON Manuals